BAMU · Second Year B.E./B.Tech Civil Engineering · NEP 2020
Surveying
PCCT-2 · Semester III · 2 credits · CIA 20 + SEE 30
A 2-credit course: CIA 20 + SEE 30.
Module 1: Levelling; Contouring
8 hoursAuto, laser and digital levels; simple, differential, fly, check, profile and reciprocal levelling, longitudinal and cross sections and volumes; contours and their interpolation; permanent adjustments of the dumpy level.
Examined in the 30-mark end-semester paper
- Levels and levelling terms
- Types of levelling
- Reduced levels: collimation and rise-and-fall methods
- Contours and contouring
- Volumes by trapezoidal and prismoidal formulae
- Two-peg test
Module 2: Theodolite
8 hoursThe vernier theodolite and its axes; horizontal and vertical angles, bearings, heights of accessible and inaccessible objects; theodolite traversing, consecutive and independent coordinates, Gale's traverse table, omitted measurements, area by coordinates; permanent adjustments.
Examined in the 30-mark end-semester paper
- Theodolite and its adjustments
- Measuring horizontal and vertical angles
- Heights and distances by trigonometric levelling
- Latitudes and departures
- Balancing a traverse
- Omitted measurements
Module 3: Plane Table Survey; Tacheometry; Minor Instruments; Curves; Setting Out; Modern Surveying
14 hoursPlane tabling and the two- and three-point problems; stadia tacheometry and its constants; planimeter, Abney level, box sextant and clinometer; simple, compound and transition curves; setting out buildings, culverts, bridges and tunnels; EDM, digital theodolite, total station, GPS and GIS.
Examined in the 30-mark end-semester paper
- Plane table surveying
- Stadia tacheometry
- Planimeter and the zero circle
- Elements of a simple circular curve
- Compound curves
- Transition curves
- Setting out works and route surveys
- Total station surveying
Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).