BAMU SY Civil syllabus

BAMU · Second Year B.E./B.Tech Civil Engineering · NEP 2020

Fluid Mechanics

PCCT-1 · Semester III · 3 credits · CIA 40 + SEE 60

  1. Module 1: Properties of Fluids; Fluid Statics; Fluid Kinematics; Fluid Dynamics

    15 hours

    Fluid properties and the rheological diagram; pressure measurement, hydrostatic forces on plane and curved surfaces, buoyancy and metacentric height; types of flow, stream lines and the continuity equation; Euler's and Bernoulli's equations, Venturi meter, Pitot tube, orifices, notches and weirs.

    Examined in the 60-mark end-semester paper

    • Properties of fluids
    • Pressure and its measurement
    • Pressure on curved surfaces
    • Buoyancy and metacentric height
    • Types of flow and flow lines
    • Continuity equation
    • Euler's equation and Bernoulli's equation
    • Notches and weirs
  2. Module 2: Flow Through Pipes; Dimensional Analysis and Similarity; Flow in Open Channels

    15 hours

    Major and minor losses, HGL and TEL, equivalent and branched pipes, siphons, three-reservoir problems and pipe-network analysis with EPANET; Rayleigh's and Buckingham's methods and model similarity; channel geometry, velocity distribution, Chezy's and Manning's equations, specific energy and specific force.

    Examined in the 60-mark end-semester paper

    • Minor losses in pipes
    • Hydraulic gradient and energy lines
    • Pipes in series and parallel
    • Three-reservoir problems and pipe networks with EPANET
    • Dimensional analysis: Rayleigh and Buckingham π methods
    • Model similitude and dimensionless numbers
    • Uniform flow: Chezy's and Manning's formulae
    • Specific energy and critical depth
  3. Module 3: Non-Uniform Flow; Water Power Engineering

    15 hours

    Gradually varied flow, rapidly varied flow and the hydraulic jump in rectangular channels with conjugate depths; centrifugal and reciprocating pumps, priming and cavitation; impulse and reaction turbines, their efficiency, specific speed and selection.

    Examined in the 60-mark end-semester paper

    • Gradually varied flow
    • Froude number and the hydraulic jump
    • Centrifugal pumps
    • Reciprocating pumps
    • Hydraulic turbines: types, efficiency and specific speed

Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).