BAMU SY Civil syllabus

BAMU · Second Year B.E./B.Tech Civil Engineering · NEP 2020

Building, Planning and Design

PCCT-2 · Semester IV · 2 credits · CIA 20 + SEE 30

A 2-credit course: CIA 20 + SEE 30.

All notes for this subject
  1. Module 1: Building Byelaws and Design Principles of Buildings

    8 hours

    Roles of owner, architect, structural engineer and contractor; building byelaws, principles of planning and the local authority; site selection, classification of buildings, area and height limits; submission and working drawings; RERA.

    Examined in the 30-mark end-semester paper

    • Building bye-laws and UDCPR
    • Principles of building planning
    • Classification of buildings and loads
    • Built-up area, carpet area, FSI and TDR
    • Site selection and submission drawings
    • Roles of owner, architect, engineer and contractor; RERA
  2. Module 2: Perspective Drawing; Requirements of Public Buildings

    10 hours

    Perspective terms and one- and two-point perspectives; general requirements of buildings for health and education, industrial and residential buildings and apartments.

    Examined in the 30-mark end-semester paper

    • One-point and two-point perspective
    • Planning public, industrial and residential buildings
  3. Module 3: Construction Techniques; Building Finishes

    12 hours

    Formwork, damp proofing, termite proofing, fire protection, shoring and scaffolding; plastering, pointing, painting, waterproofing, plumbing, sound insulation and air conditioning.

    Examined in the 30-mark end-semester paper

    • Formwork and scaffolding
    • Damp proofing, termite proofing and waterproofing
    • Fire safety in buildings
    • Finishing materials: paints and claddings
    • Plumbing and drainage plans
    • Building acoustics and Sabine's formula
    • Ventilation and air conditioning

Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).