BAMU Final Year Mechanical syllabus

BAMU · Final Year B.E. Mechanical Engineering · CBCS (2019)

Refrigeration and Air Conditioning

MED453 · Semester VIII · 4 credits · CT 20 + theory 80

  1. Unit 1: Introduction; Simple Vapour Compression Cycle

    8 hours

    Refrigerators, heat pumps, COP and the unit of refrigeration; the Carnot refrigeration cycle; the vapour compression cycle on T-s and p-h charts, effects of operating conditions, subcooling and superheating, and the actual cycle.

    Examined in the 80-mark end-semester paper

    • Carnot refrigeration cycle and COP
    • Vapour compression cycle
    • Effect of operating conditions on the VCC
  2. Unit 2: Multistage Vapour Compression

    6 hours

    Limits of simple VCC at low temperatures; intercooling arrangements; multi-evaporator, compound and cascade systems.

    Examined in the 80-mark end-semester paper

    • Multistage compression with flash intercooling
    • Multi-evaporator systems
    • Cascade refrigeration
  3. Unit 3: Gas Cycle Refrigeration

    6 hours

    Air refrigeration versus VCC; the Bell–Coleman and regenerative cycles; aircraft refrigeration systems and their analysis; dry air rated temperature.

    Examined in the 80-mark end-semester paper

    • Bell–Coleman cycle and air refrigeration
    • Aircraft refrigeration systems
  4. Unit 4: Vapour Absorption System

    6 hours

    Principle and refrigerant–absorbent pairs; absorption versus compression; simple and modified absorption systems; T–c and h–c diagrams; lithium bromide–water system.

    Examined in the 80-mark end-semester paper

    • Vapour absorption refrigeration
    • Lithium bromide–water absorption system
  5. Unit 5: Psychrometry

    9 hours

    Psychrometric properties and relations; adiabatic saturation and wet-bulb temperature; processes on the chart; adiabatic mixing; bypass factor and ADP; ventilation and infiltration; air-conditioning calculations.

    Examined in the 80-mark end-semester paper

    • Psychrometric properties of air
    • Psychrometric processes and the chart
    • Bypass factor, ADP and sensible heat factors
    • Ventilation and infiltration
  6. Unit 6: Refrigerants; Applications

    5 hours

    Properties, classification, designation and selection of refrigerants; ODP and GWP and CFC substitutes; azeotropes and secondary refrigerants; domestic refrigerators, water coolers, ice plants, cold storage, steam jet refrigeration and mine air conditioning.

    Examined in the 80-mark end-semester paper

    • Refrigerants: designation, ODP and GWP
    • Applications: domestic refrigerators, ice plants and cold storage

Unit contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).