BAMU Final Year Mechanical syllabus

BAMU · Final Year B.E. Mechanical Engineering · CBCS (2019)

Energy Conservation and Management

MED404 · Semester VII · 4 credits · CT 20 + theory 80

All notes for this subject
  1. Unit 1: Energy Scenario and Renewable Systems

    8 hours

    Commercial and non-commercial energy, energy pricing and security; the Energy Conservation Act and BEE star rating; the National Solar Mission; energy efficiency in buildings (earth–air heat exchangers, skylights, PV); Kyoto Protocol and CDM.

    Examined in the 80-mark end-semester paper

    • Energy scenario in India and the world
    • Energy conservation and efficiency
    • Energy Conservation Act
    • Energy efficiency in buildings and BEE star rating
    • Carbon credits
  2. Unit 2: Mechanical Systems

    8 hours

    Energy conservation in boilers, steam distribution, compressed air, refrigeration and air conditioning, pumps and fans; solar hot water; biofuels and biodiesel.

    Examined in the 80-mark end-semester paper

    • Boiler efficiency: direct method
    • Steam traps and condensate recovery
    • Energy assessment of pumps, fans and compressors
    • Solar hot water and biofuel applications
  3. Unit 3: Co-generation

    4 hours

    Cogeneration in sugar factories; cogeneration options in industry, selection criteria and control strategy.

    Examined in the 80-mark end-semester paper

    • Cogeneration and trigeneration
  4. Unit 4: Electrical Systems

    8 hours

    Electric vehicles for emission control, their power storage and charging needs; generation and demand-side management; power factor improvement; load scheduling; efficient motors, variable-speed drives and lighting.

    Examined in the 80-mark end-semester paper

    • Electric vehicles and charging infrastructure
    • Demand-side management and load scheduling
    • Power factor improvement
    • Energy-efficient motors
    • Lighting system efficiency
  5. Unit 5: Energy Audit

    8 hours

    Need for and types of energy audit; audit methodology and instruments; case studies in households and sugar, glass and paper industries.

    Examined in the 80-mark end-semester paper

    • Types of energy audit
    • Energy audit methodology and instruments
    • Benchmarking and audit reports
  6. Unit 6: Financial Management

    8 hours

    Sankey diagrams; conservation options for households and industry; financial analysis of efficient appliances and renewable systems by payback, ROI, NPV, IRR and life-cycle cost.

    Examined in the 80-mark end-semester paper

    • Sankey diagrams and energy flow
    • Payback, NPV and IRR
    • Life-cycle costing

Unit contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).