BAMU Final Year Mechanical syllabus

BAMU · Final Year B.E. Mechanical Engineering · CBCS (2019)

Automobile Engineering

MED451 · Semester VIII · 4 credits · CT 20 + theory 80

All notes for this subject
  1. Unit 1: Introduction

    4 hours

    Classification and main components of automobiles; layouts by engine position and drive; engine types and selection; chassis and body.

    Examined in the 80-mark end-semester paper

    • Power flow layouts
    • Chassis and body structures
  2. Unit 2: Transmission System

    10 hours

    Clutches; gearbox resistances, tractive effort and performance; sliding-mesh, constant-mesh, synchromesh and epicyclic gearboxes; overdrive and selector mechanisms; automatic transmissions and torque converters; differentials, propeller shafts and universal joints.

    Examined in the 80-mark end-semester paper

    • Clutches and fluid flywheel
    • Tractive effort and vehicle performance
    • Gearboxes and automatic transmissions
    • Final drive and differential
    • Universal and CV joints
  3. Unit 3: Suspension System

    6 hours

    Springs and shock absorbers; rigid-axle, twist-beam and independent (wishbone, MacPherson, trailing arm) suspensions; air and telescopic suspension; anti-roll bars; electronic and active suspension.

    Examined in the 80-mark end-semester paper

    • Independent suspension systems
    • Shock absorbers
    • Active and air suspension
  4. Unit 4: Axles, Steering and Tyres

    8 hours

    Front and rear axles and final drive; steering geometry, wheel alignment and balancing; understeer and oversteer; steering gearboxes and power steering; wheels, rims and tyres.

    Examined in the 80-mark end-semester paper

    • Front stub axles
    • Rear axle types
    • Steering geometry and wheel alignment
    • Steering gears and power steering
    • Wheels and tyres
  5. Unit 5: Braking Systems

    6 hours

    Drum and disc brakes; mechanical, hydraulic and air brakes; tandem master cylinders; ABS; parking brakes.

    Examined in the 80-mark end-semester paper

    • Hydraulic and air brakes
    • Anti-lock braking systems
  6. Unit 6: Automotive Electricals and Additional Systems

    6 hours

    Ignition, starting and charging systems; instruments; door electronics; automobile air conditioning; safety systems; pollution norms and control devices.

    Examined in the 80-mark end-semester paper

    • Starting systems
    • Automotive batteries and charging
    • Automotive lighting and wiring
    • Vehicle testing, maintenance and emission norms

Unit contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).