BAMU Final Year Mechanical syllabus

BAMU · Final Year B.E. Mechanical Engineering · CBCS (2019)

Aerospace Engineering

MED455 · Elective II · Semester VIII · 4 credits · CT 20 + theory 80

One of the Elective II options.

All notes for this subject
  1. Unit 1: Introduction

    2 hours

    Components of an aircraft; types of aerial vehicles.

    Examined in the 80-mark end-semester paper

    • Aircraft components and types of aerial vehicles
  2. Unit 2: Basic Aerodynamics

    10 hours

    Fluid dynamic equations; ideal and viscous flows; flow past a body and separation; lift, drag and moment and their coefficients; aerofoils and wings; supersonic flight, wave drag and the drag polar (descriptive).

    Examined in the 80-mark end-semester paper

    • Fluid dynamic equations for aerodynamics
    • Flow past bodies and flow separation
    • Lift, drag and moment coefficients
    • Aerofoil families and wings
    • Supersonic flight and wave drag
    • Aircraft drag polar
  3. Unit 3: Aircraft Performance

    8 hours

    Powerplants; thrust, power and fuel flow with altitude and speed; steady level and climbing flight; absolute ceiling; energy methods; range and endurance; turns and pull-ups; take-off and landing (descriptive).

    Examined in the 80-mark end-semester paper

    • Aircraft powerplants and thrust variation
    • Steady level and climbing flight
    • Range and endurance
    • Turning flight, take-off and landing
  4. Unit 4: Aerospace Propulsion

    10 hours

    Propulsive devices; electric, nuclear and chemical rockets; nozzle flow, real nozzles and thrust vector control; rocket performance; solid propellant grains; liquid propellant injectors, cooling and feed systems; heat transfer in rocket engines (descriptive).

    Examined in the 80-mark end-semester paper

    • Classification and applications of rockets
    • Rocket nozzles and thrust vector control
    • Rocket performance parameters
    • Solid propellant rockets and grain design
    • Liquid propellant rockets and feed systems
  5. Unit 5: Aircraft Design

    6 hours

    Three phases of aircraft design; computer-based design methods; LTA versus HTA aircraft; civil and military aircraft types (descriptive).

    Examined in the 80-mark end-semester paper

    • Phases of aircraft design
    • Civil and military aircraft types
  6. Unit 6: Aerodynamics of Aerofoils and Wings

    4 hours

    Aerofoil and wing nomenclature; lift, drag and pitching moment coefficients; centre of pressure and aerodynamic centre (descriptive).

    Examined in the 80-mark end-semester paper

    • Aerofoil nomenclature
    • Centre of pressure and aerodynamic centre

Unit contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).