BAMU · Final Year B.E. Mechanical Engineering · CBCS (2019)
Advanced Materials and Manufacturing
MED408 · Elective I · Semester VII · 4 credits · CT 20 + theory 80
One of the Elective I options.
Unit 1: Composites
8 hoursClassification, properties and applications of polymer-, metal- and ceramic-matrix composites; fibres and whiskers; laminar, filled, particulate and hybrid composites; design, rule of mixtures, critical volume fraction and critical angle.
Examined in the 80-mark end-semester paper
- Classification and applications of composites
- Matrix materials: polymer, metal and ceramic
- Fibre reinforcements and whiskers
- Laminar, particulate and hybrid composites
- Rule of mixtures and critical fibre volume fraction
Unit 2: Organic Materials; Ceramics
8 hoursThermoplastics, thermosets and elastomers, their mechanical behaviour, forming and applications; classification, properties, structure and processing of ceramics, refractories, electronic ceramics, cement and concrete.
Examined in the 80-mark end-semester paper
- Thermoplastics, thermosets and elastomers
- Forming techniques for polymers
- Ceramics: structure, properties and processing
- Refractories and electronic ceramics
Unit 3: Miscellaneous Materials
4 hoursCutting tool, semiconducting, dielectric, magnetic and ferroelectric materials; smart materials and superalloys; shape memory alloys and nanomaterials.
Examined in the 80-mark end-semester paper
- Cutting tool materials
- Semiconducting, dielectric and magnetic materials
- Smart materials and superalloys
- Shape memory alloys and nanomaterials
Unit 4: Advances in Casting
8 hoursSheet moulding, V-process, flaskless moulding, evaporative and plaster mould casting; quality and accuracy in casting and moulding.
Examined in the 80-mark end-semester paper
- Advanced casting: V-process, flaskless and evaporative casting
- Plaster mould casting and casting quality
Unit 5: Metallic Coatings
4 hoursPrinciples and applications of CVD, PVD, thermal spray, electroplating and electroless coating.
Examined in the 80-mark end-semester paper
- CVD and PVD coatings
- Thermal spray, electroplating and electroless coating
Unit 6: Non-traditional Machining; Rapid Prototyping
8 hoursChemical, electrochemical, EDM and wire EDM, magnetic abrasive and abrasive flow finishing, water jet machining and micro drilling; non-traditional deburring; principles of rapid prototyping, SLS, LOM and FDM.
Examined in the 80-mark end-semester paper
- Non-traditional machining: ECM, EDM and wire EDM
- Abrasive flow, magnetic abrasive and water jet machining
- Rapid prototyping: SLS, LOM and FDM
Unit contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).