BAMU Final Year E&TC syllabus

BAMU · Final Year B.E. Electronics & Telecommunication Engineering · CBCS (2019)

Fiber Optic Communication

ETC491 · Elective II · Semester VIII · 4 credits · CT 20 + theory 80

One of the Elective II options.

  1. Unit 1: Introduction

    8 hours

    The optical fiber communication system, ray-theory transmission, types and construction of fibers, fiber materials and propagation, with numericals.

    Examined in the 80-mark end-semester paper

    • Optical fiber communication link
    • Ray and wave theory of propagation
    • Numerical aperture and acceptance angle
    • Single-mode and dispersion-shifted fibers
  2. Unit 2: Light Sources and Detectors

    6 hours

    LEDs and lasers, photodiodes and phototransistors, source and detector parameters and opto-isolators.

    Examined in the 80-mark end-semester paper

    • Light emitting diodes
    • Laser diodes
    • PIN photodiode
    • Quantum efficiency and responsivity
    • Phototransistors and opto-isolators
  3. Unit 3: Optical Fiber Losses

    6 hours

    Attenuation and absorption, scattering, dispersion, bending and coupling losses, splices and connectors.

    Examined in the 80-mark end-semester paper

    • Attenuation in optical fibers
    • Dispersion in optical fibers
    • Fiber fabrication, splices and connectors
  4. Unit 4: Digital Fiber-Optic Systems

    6 hours

    System design considerations, noise penalties and system margin, WDM, and the link power and rise-time budgets.

    Examined in the 80-mark end-semester paper

    • Optical power budget
    • Rise time budget
    • Power penalties and crosstalk
    • Wavelength division multiplexing
  5. Unit 5: Optical Networks

    6 hours

    Network concepts and topologies, SONET and SDH, photonic switching and sensors, WDM networks, passive optical networks and optical Ethernet.

    Examined in the 80-mark end-semester paper

    • Optical network topologies
    • SONET and SDH
    • WDM network architectures
    • Passive optical networks and FTTH
  6. Unit 6: Performance Measurement and Monitoring

    8 hours

    Measurement standards and test equipment, optical power measurement, fiber characteristics, eye-diagram tests, the OTDR and optical performance monitoring.

    Examined in the 80-mark end-semester paper

    • Attenuation measurement by cutback
    • Eye diagram
    • OTDR
    • Optical network management

Unit contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).