BAMU · Final Year B.E. Electronics & Telecommunication Engineering · CBCS (2019)
Antenna Theory
ETC452 · Semester VIII · 4 credits · CT 20 + theory 80
Unit 1: Fundamental Parameters of Antennas
8 hoursIsotropic radiators, radiation pattern, gain, directivity, reciprocity, effective aperture, radiation resistance, self and mutual impedance, front-to-back ratio, beamwidth, bandwidth, beam efficiency and solid angle, polarisation, antenna temperature and the Friis equation.
Examined in the 80-mark end-semester paper
- Isotropic radiators and radiation patterns
- Gain, directivity and the reciprocity theorem
- Effective aperture and radiation resistance
- Self and mutual impedance
- Beamwidth, beam solid angle, bandwidth and polarisation
- Antenna temperature
- Friis transmission equation
Unit 2: Linear Wire and Loop Antennas
6 hoursCurrent distribution on a thin wire; infinitesimal, small, finite-length and half-wave dipoles and ground effects; small circular and rectangular loops.
Examined in the 80-mark end-semester paper
- Current distribution on thin wire antennas
- Infinitesimal and small dipoles
- Finite-length and half-wave dipoles
- Ground effects on antennas
- Small circular and rectangular loop antennas
Unit 3: Arrays
6 hoursPatterns of centre-fed horizontal and vertical dipoles, the two-element and uniform linear arrays, field strength and side-lobe ratio, broadside and end-fire arrays, arrays of non-isotropic radiators and binomial arrays.
Examined in the 80-mark end-semester paper
- Two-element arrays and pattern multiplication
- Uniform linear arrays: broadside and end-fire
- Side-lobe ratio of uniform arrays
- Binomial arrays
Unit 4: Frequency-independent, Aperture and Lens Antennas
8 hoursLog-periodic and Yagi–Uda antennas, rectangular aperture antennas, and dielectric and metal-plate lens antennas.
Examined in the 80-mark end-semester paper
- Log-periodic antennas
- Yagi–Uda antennas
- Rectangular aperture antennas
- Dielectric and metal-plate lens antennas
Unit 5: Microstrip Antennas
6 hoursBasic characteristics, feeding mechanisms, methods of analysis, and design of rectangular and circular patches.
Examined in the 80-mark end-semester paper
- Microstrip patch antennas and feeding methods
- Design of rectangular and circular patches
Unit 6: Microwave Antennas
6 hoursE- and H-plane sectoral, pyramidal, conical, corrugated, aperture-matched and multimode horns and the phase centre; plane, corner, parabolic and spherical reflectors.
Examined in the 80-mark end-semester paper
- Horn antennas: sectoral, pyramidal and conical
- Corrugated and multimode horns and the phase centre
- Reflector antennas: plane, corner and parabolic
Unit contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).