BAMU Final Year Electrical syllabus

BAMU · Final Year B.E. Electrical Engineering · CBCS (2019)

Power System Protection

EEP/402 · Semester VII · 4 credits · CT 20 + theory 80

  1. Unit 1: Introduction to Protective Relaying

    4 hours

    Requirements and desirable qualities of protective relaying, zones of protection and relaying terms; classification of protective schemes; current, potential and summation transformers.

    Examined in the 80-mark end-semester paper

    • Zones of protection
    • Primary and backup protection
    • Classification of protective relays and automatic reclosing
    • CTs and VTs for protection
    • Summation transformers and desirable qualities of relaying
  2. Unit 2: Relays

    8 hours

    Construction, working, characteristics and settings of electromagnetic relays; static, induction-type earth fault, directional, distance, differential, Translay, negative-sequence and electro-thermal relays.

    Examined in the 80-mark end-semester paper

    • Overcurrent and directional relays
    • Induction relay, PSM and TSM
    • Distance relays: impedance, reactance and mho
    • Percentage differential relays
    • Static relays
    • Translay and negative sequence relays
  3. Unit 3: Protection Schemes

    8 hours

    Alternator protection against stator and rotor faults, unbalance and overloading; transformer protection with harmonic restraint, restricted earth fault, frame leakage, Buchholz and Merz-Price; induction motor protection.

    Examined in the 80-mark end-semester paper

    • Alternator protection
    • Transformer differential protection
    • Buchholz relay and inrush
    • Bus zone and frame leakage protection
    • Induction motor protection
    • Earth fault and phase fault protection
  4. Unit 4: Protection of Transmission Lines

    6 hours

    Differential, distance and carrier current protection of feeders, busbars and lines; protecting stations, substations and lines against lightning and travelling waves; lightning arresters, surge absorbers and the Peterson coil.

    Examined in the 80-mark end-semester paper

    • Three-zone distance protection
    • Carrier protection and PLCC
    • Protection of lines and substations against lightning
    • Protection against travelling waves
    • Surge absorbers and the Peterson coil
  5. Unit 5: Circuit Breakers

    10 hours

    Arc formation and interruption theories, restriking and recovery voltage, RRRV, resistance switching, current chopping and capacitive current; air-break, air-blast, minimum oil, SF6 and vacuum breakers, MCB and ELCB; ratings and selection.

    Examined in the 80-mark end-semester paper

    • Arc formation and interruption
    • Restriking voltage and RRRV
    • Current chopping
    • Interruption of capacitive current
    • Air-break, oil and air-blast circuit breakers
    • SF6 circuit breaker
    • Vacuum circuit breaker
    • Circuit breaker ratings
  6. Unit 6: Microprocessor Based Protective Relays

    4 hours

    Microprocessor-based overcurrent, impedance, directional and reactance relays.

    Examined in the 80-mark end-semester paper

    • Microprocessor-based overcurrent and impedance relays
    • Numerical relays

Unit contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).