BAMU · Final Year B.E. Electrical Engineering · CBCS (2019)
Power System Operation and Control
EEP/452 · Semester VIII · 4 credits · CT 20 + theory 80
Unit 1: Synchronous Machine Modelling
8 hoursMachine structure, MMF waveforms and d-q axes; stator and rotor equations and inductances; the dq0 (Park's) transformation, power and torque; the swing equation and inertia constant; two-axis and classical models for large studies.
Examined in the 80-mark end-semester paper
- Synchronous machine modelling: dq0 transformation
- Swing equation
- Two-axis and classical machine models
Unit 2: Modelling of Excitation and Speed Governing System
7 hoursExcitation system requirements, elements, types and IEEE (1992) models; hydraulic turbine transfer function, governors with transient droop; steam turbine and generic speed-governing models.
Examined in the 80-mark end-semester paper
- Excitation system requirements
- Types of excitation systems
- Excitation control and protection
- Speed governing and turbine models
Unit 3: Small Signal Stability Analysis
7 hoursClassification of stability and rotor angle stability; state-space stability of dynamic systems; small-signal stability of a single machine connected to an infinite bus with the classical model.
Examined in the 80-mark end-semester paper
- Steady state, transient and dynamic stability
- Small-signal stability of a single machine infinite bus system
Unit 4: Economic Operation of Power System
5 hoursEconomic dispatch reviewed; hydrothermal scheduling by dynamic programming; pumped storage plants; maintenance scheduling of generating units.
Examined in the 80-mark end-semester paper
- Economic dispatch by Lagrange multipliers
- Hydro-thermal scheduling
- Maintenance scheduling of generating units
Unit 5: Reactive Power and Voltage Control
9 hoursProduction and absorption of reactive power; voltage control by shunt reactors and capacitors, series capacitors, synchronous condensers and static VAR systems; tap-changing transformers and ULTC control; distribution voltage regulation.
Examined in the 80-mark end-semester paper
- Production and absorption of reactive power
- Methods of voltage control
- Shunt reactors, series and shunt capacitors
- Synchronous condensers and static VAR systems
- Tap-changing transformers and ULTC control
Unit 6: Control of Power Systems
4 hoursAGC and reactive power control reviewed; operating states and security control, contingency analysis and corrective controls; energy control centres, SCADA and EMS.
Examined in the 80-mark end-semester paper
- Governor dead band and automatic generation control
- Power system security and contingency analysis
- Energy control centres, SCADA and EMS
Unit contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).