BAMU Final Year Electrical syllabus

BAMU · Final Year B.E. Electrical Engineering · CBCS (2019)

Power Electronics II

EEP/442 · Elective I · Semester VII · 4 credits · CT 20 + theory 80

One of the Elective I options.

  1. Unit 1: Basic Concepts of Power Semiconductor Devices

    2 hours

    Power diode, SCR, GTO, power MOSFET, IGBT and IGCT.

    Examined in the 80-mark end-semester paper

    • Power diodes and power BJTs
    • Power MOSFET and IGBT
    • GTO and MCT
  2. Unit 2: AC-DC Power Converters

    8 hours

    Single- and three-phase controlled rectifiers reviewed; power factor improvement by extinction angle, symmetric angle and PWM control; single-phase sinusoidal and three-phase PWM rectifiers; twelve-pulse converters.

    Examined in the 80-mark end-semester paper

    • Three-phase fully controlled converter
    • Extinction angle and symmetric angle control
    • Single-phase PWM rectifier
    • Three-phase PWM rectifier
  3. Unit 3: DC-AC Power Converters

    8 hours

    Single- and three-phase inverters reviewed; voltage control of single- and three-phase inverters and advanced modulation techniques.

    Examined in the 80-mark end-semester paper

    • Single-phase full-bridge inverter
    • Three-phase inverter: 120 and 180 degree modes
    • PWM techniques
    • Voltage control of single and three-phase inverters
  4. Unit 4: Multilevel Inverters

    8 hours

    Diode-clamped, flying-capacitor and cascaded multilevel inverters, their applications and comparison.

    Examined in the 80-mark end-semester paper

    • Multilevel inverters
    • Diode-clamped, flying-capacitor and cascaded multilevel inverters
  5. Unit 5: Resonant Pulse Inverters

    8 hours

    Series resonant inverters and their frequency response; parallel resonant inverters and voltage control; class E resonant inverters; ZCS and ZVS resonant converters compared.

    Examined in the 80-mark end-semester paper

    • Series, parallel and class E resonant inverters
    • Resonant converters: ZCS and ZVS
  6. Unit 6: DC Power Supplies

    6 hours

    Flyback, forward, push-pull, half-bridge and full-bridge converters and their control circuits.

    Examined in the 80-mark end-semester paper

    • Switched mode power supplies
    • Flyback, forward and push-pull converters
    • Half-bridge and full-bridge DC power supplies

Unit contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).