BAMU Final Year Electrical syllabus

BAMU · Final Year B.E. Electrical Engineering · CBCS (2019)

Industrial Automation

EEP/404 · Semester VII · 4 credits · CT 20 + theory 80

All notes for this subject
  1. Unit 1: Introduction

    7 hours

    Automation defined; mechanical, hydraulic, pneumatic, electrical and computerised automation; the hierarchy of operation, machine, process, factory and system automation.

    Examined in the 80-mark end-semester paper

    • Types of industrial automation
    • Hierarchy of automation: operation, machine, process and factory
  2. Unit 2: Levels of Automation

    6 hours

    Manual, semi-automatic and fully automatic operation; discrete, batch and continuous process control; traditional control, DCS and SCADA compared.

    Examined in the 80-mark end-semester paper

    • Principles and levels of automation
    • Discrete, batch and continuous process control
    • Traditional control, DCS and SCADA compared
  3. Unit 3: Programmable Logic Controllers and Advanced PLC Functions

    6 hours

    PLC ladder programming and communication standards (RS232, RS485, Modbus ASCII/RTU); analog PLC operation and interfacing; AC and DC motor control and variable-frequency drives.

    Examined in the 80-mark end-semester paper

    • Ladder diagram programming
    • Modbus and DNP3
    • Analog and PID operations in PLCs
    • Motor control with PLCs
  4. Unit 4: SCADA

    8 hours

    SCADA architecture with HMI, MTU and RTU; alarm handling, trending, access control, logging, archiving and reports; command-line, graphical, web and other user interfaces; SCADA communication and protocols.

    Examined in the 80-mark end-semester paper

    • SCADA architecture: HMI, MTU and RTU
    • SCADA alarm handling, trending, logging and reports
    • SCADA user interfaces
    • SCADA communication and standard protocols
  5. Unit 5: SCADA Hardware

    6 hours

    SCADA hardware architecture, software functions and configuration; SCADA in interconnected power systems, substation automation, generation, transmission and distribution.

    Examined in the 80-mark end-semester paper

    • SCADA hardware and software configuration
    • SCADA in power systems
  6. Unit 6: Distributed Control System

    7 hours

    DCS architecture, elements and communication links; centralised versus distributed control; displays, local control units, MTBF, data highways, field buses, multiplexers and remote terminal units.

    Examined in the 80-mark end-semester paper

    • Distributed control systems
    • Centralised versus distributed control and DCS displays
    • DCS local control unit architecture
    • HART and Fieldbus protocols

Unit contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).