BAMU Final Year Electrical syllabus

BAMU · Final Year B.E. Electrical Engineering · CBCS (2019)

Flexible AC Transmission System

EEP/441 · Elective I · Semester VII · 4 credits · CT 20 + theory 80

One of the Elective I options.

  1. Unit 1: FACTS Concept and General System Considerations

    4 hours

    Transmission interconnections; power flow in parallel paths and meshed systems; what limits loading capability; the relative importance of controllable parameters.

    Examined in the 80-mark end-semester paper

    • Need for FACTS
    • Power flow control in parallel paths
    • Power flow and loading capability of AC interconnections
  2. Unit 2: FACTS Controllers and Converters

    6 hours

    Basic types of FACTS controllers: shunt, series and combined; voltage-source converter concepts and single- and three-phase full-wave bridge operation.

    Examined in the 80-mark end-semester paper

    • Types of FACTS controllers
    • Voltage and current source converters
  3. Unit 3: Static Shunt Compensator

    10 hours

    Objectives of shunt compensation and methods of controllable VAR generation; SVC and STATCOM compared; static VAR systems.

    Examined in the 80-mark end-semester paper

    • Shunt compensation for midpoint voltage and stability
    • Methods of controllable VAR generation
    • SVC
    • STATCOM
    • SVC versus STATCOM
  4. Unit 4: Static Series Compensator

    8 hours

    Objectives of series compensation; variable-impedance and switching-converter compensators: GCSC, TSSC, TCSC and SSSC.

    Examined in the 80-mark end-semester paper

    • Objectives of series compensation
    • Thyristor-switched series capacitor
    • TCSC and SSSC
    • GTO thyristor-controlled series capacitor
  5. Unit 5: Static Voltage and Phase Angle Regulators

    8 hours

    Thyristor-controlled voltage regulators (TCVR) and phase angle regulators (TCPAR).

    Examined in the 80-mark end-semester paper

    • Static phase shifters
    • Voltage and phase angle regulators: TCVR and TCPAR
  6. Unit 6: Combined Compensators

    4 hours

    UPFC, IPFC and special-purpose controllers; the NGH-SSR damping scheme, thyristor-controlled braking resistor and applications of FACTS.

    Examined in the 80-mark end-semester paper

    • Unified power flow controller
    • Interline power flow controller
    • Special-purpose FACTS controllers
    • NGH-SSR damping and thyristor-controlled braking resistor

Unit contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).