BAMU Final Year Electrical syllabus

BAMU · Final Year B.E. Electrical Engineering · CBCS (2019)

Electrical Drives

EEP/401 · Semester VII · 4 credits · CT 20 + theory 80

  1. Unit 1: Fundamentals of Electric Drives

    10 hours

    Parts and dynamics of electric drives, torque equations and speed-torque conventions; load torque components and load equalisation; closed-loop, current-limit and PLL speed control; selecting drive components.

    Examined in the 80-mark end-semester paper

    • Electric drive components
    • Dynamics of electric drives and torque equations
    • Load torque and steady-state stability
    • Load equalisation
    • Closed-loop control, current limit and speed sensing
    • Selection of drive components
  2. Unit 2: DC Motor Drives

    10 hours

    Constant torque and constant power control; single- and three-phase controlled rectifier fed DC drives, continuous and discontinuous operation; four-quadrant and dual converter control; chopper-fed drives, closed-loop speed control and braking.

    Examined in the 80-mark end-semester paper

    • Converter-fed DC drives
    • Four-quadrant operation
    • Dual converter-fed DC drives
    • Chopper-fed DC drives
    • Closed-loop speed control of DC drives
    • Braking of DC drives
  3. Unit 3: Three Phase Induction Motor Drives

    10 hours

    AC voltage control and variable-frequency control; VSI and CSI fed induction motor drives and field weakening; slip power recovery and rotor resistance control; PWM-controlled drives and industrial applications.

    Examined in the 80-mark end-semester paper

    • Stator voltage and V/f control
    • VSI and CSI fed induction motor drives
    • Field weakening operation of induction motor drives
    • Slip power recovery and rotor resistance control
    • Hysteresis current control and PWM voltage control
  4. Unit 4: Synchronous Motor and Brushless DC Motor Drives

    10 hours

    Operation from fixed- and variable-frequency supplies; VSI and CSI fed and self-controlled synchronous motor drives with cycloconverters; brushless DC motor drives for servo applications and their industrial uses.

    Examined in the 80-mark end-semester paper

    • Synchronous motor variable-speed drives
    • Self-controlled synchronous motor drives with cycloconverters
    • BLDC drive operation
    • Drives for industrial applications

Unit contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).