BAMU Final Year Electrical syllabus

BAMU · Final Year B.E. Electrical Engineering · CBCS (2019)

Control System II

EEP/495 · Elective II · Semester VIII · 4 credits · CT 20 + theory 80

One of the Elective II options.

  1. Unit 1: State Variable Analysis

    8 hours

    Solving the state equation; the state transition matrix by Laplace transform, power series and Cayley-Hamilton; diagonalisation, eigenvalues and generalised eigenvectors.

    Examined in the 80-mark end-semester paper

    • State transition matrix
    • Solution of state equations: Laplace, series and Cayley-Hamilton
    • Eigenvalues, eigenvectors and diagonalisation
  2. Unit 2: Pole Placement Techniques

    8 hours

    Improving stability by state feedback; conditions for arbitrary pole placement; state regulator and state observer design.

    Examined in the 80-mark end-semester paper

    • Controllability and observability
    • Pole placement and Ackermann's formula
    • State regulator design
    • Full-order state observer
  3. Unit 3: Digital Control Systems

    8 hours

    Discrete-time systems for digital control; the z-transform and pulse transfer function; time response of sampled-data systems; stability by Jury's criterion and the bilinear transformation.

    Examined in the 80-mark end-semester paper

    • Sampling and the zero-order hold
    • Pulse transfer function and Z-transform
    • Jury stability test and bilinear transformation
    • Stability in the z-plane
  4. Unit 4: Nonlinear Control System

    4 hours

    Behaviour of nonlinear systems; friction, backlash, dead zone, relay and multivariable nonlinearities.

    Examined in the 80-mark end-semester paper

    • Behaviour of nonlinear systems
    • Common nonlinearities
  5. Unit 5: Lyapunov Stability

    6 hours

    Lyapunov stability criteria and functions; the direct method for linear systems and the Hurwitz criterion; constructing Lyapunov functions for nonlinear systems by Krasovskii's method.

    Examined in the 80-mark end-semester paper

    • Lyapunov stability
    • Constructing Lyapunov functions: Krasovskii's method
  6. Unit 6: Intelligent Control System

    6 hours

    Fuzzy sets versus crisp sets, fuzzy set operations and fuzzy knowledge-based control; neural networks, the artificial neuron, multilayer networks and back-propagation.

    Examined in the 80-mark end-semester paper

    • Fuzzy logic control
    • Neural networks and backpropagation for control

Unit contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).