BAMU · Final Year B.E. Civil Engineering · CBCS (2019)
Pavement Design
CED 492 · Elective II · Semester VIII · 4 credits · CT 20 + theory 80
One of the Elective II options.
Unit 1: Basic Design Parameters
5 hoursMechanistic and modified AASHTO procedures: design period, structural design traffic, mixed-traffic axles, heavy vehicles, roadbed soils and terminal serviceability.
Examined in the 80-mark end-semester paper
- Factors affecting pavement design
- AASHTO and Asphalt Institute methods
Unit 2: Structural Design of Flexible Pavements
10 hoursMechanistic and modified AASHTO design: material quality, binder selection, equivalency and traffic factors, full-depth HMA thickness, limiting-strain criteria and structural number.
Examined in the 80-mark end-semester paper
- Layered theory of flexible pavements
- Fatigue and rutting criteria
- Flexible pavement design to IRC 37
Unit 3: Structural Design of Rigid Pavements
15 hoursMechanistic and modified AASHTO design: edge support, joint spacing, subgrade and subbase type and thickness, thickness design, joints and lug end anchorages.
Examined in the 80-mark end-semester paper
- Stresses in rigid pavements
- Rigid pavement design to IRC 58
- Joints in concrete pavements
Unit 4: Structural Design of Composite Pavements
15 hoursComposite pavement structural number, thickness design equations and minimum requirements.
Examined in the 80-mark end-semester paper
- Composite pavement design
Unit 5: Pavement Selection Analysis
10 hoursSelection basis, life-cycle activities, cost analysis and the selection process.
Examined in the 80-mark end-semester paper
- Pavement type selection and life-cycle cost
Unit 6: Pavement Design Submittals
5 hoursSubmittal requirements and content, and shelf-life of approved pavement designs.
Examined in the 80-mark end-semester paper
- Pavement management systems
Unit contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).