BAMU Final Year Civil syllabus

BAMU · Final Year B.E. Civil Engineering · CBCS (2019)

Foundation Engineering

CED 404 · Semester VII · 4 credits · CT 20 + theory 80

  1. Unit 1: Site Investigation

    6 hours

    Need for and methods of investigation: drilling, pits, trenches and shafts, in-situ and laboratory testing, sampling, and the site investigation report.

    Examined in the 80-mark end-semester paper

    • Planning subsurface exploration
    • Boring, sampling and samplers
    • Soil investigation report
  2. Unit 2: Bearing Capacity of Soil and Settlement Analysis

    10 hours

    Terzaghi's, Meyerhof's, Prandtl's, Hansen's and Vesic's bearing capacity; plate load and SPT; effects of water table and eccentric loads; immediate, consolidation and differential settlement.

    Examined in the 80-mark end-semester paper

    • Terzaghi's bearing capacity theory
    • Meyerhof, Hansen, Vesic and IS methods
    • Plate load test
    • SPT and its corrections
    • Layered soils, water table and eccentricity
    • Immediate settlement
    • Allowable and differential settlement
  3. Unit 3: Shallow Foundation

    4 hours

    Design considerations and construction of footings on sand and clay, proportioning, combined and cantilever footings, and raft foundations.

    Examined in the 80-mark end-semester paper

    • Proportioning of combined and strap footings
    • Raft foundations
  4. Unit 4: Pile Foundation

    10 hours

    Types of piles and driving methods, length and capacity by static and dynamic formulae, negative skin friction, group action and spacing, under-reamed piles.

    Examined in the 80-mark end-semester paper

    • Classification and installation of piles
    • Static capacity of piles
    • Dynamic pile formulae
    • Pile groups and negative skin friction
    • Under-reamed piles
  5. Unit 5: Wells and Caissons; Difficult Soils

    6 hours

    Well components, design load, scour, sinking and correcting tilts; open, drilled and pneumatic caissons; foundations on black cotton soil and dewatering.

    Examined in the 80-mark end-semester paper

    • Well foundations: components and sinking
    • Tilts and shifts in wells
    • Piers and caissons
    • Foundations on expansive soils
  6. Unit 6: Cofferdams

    4 hours

    Sheet piles and sheet-pile walls; single-wall, double-wall, cellular, braced and diaphragm cofferdams; pumping and sealing.

    Examined in the 80-mark end-semester paper

    • Cantilever and anchored sheet piles
    • Cofferdams

Unit contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).