BAMU · Final Year B.E. Civil Engineering · CBCS (2019)
Design of Structures III
CED 403 · Semester VII · 4 credits · CT 20 + theory 80
A 4-hour paper; IS 456, IS 3370 and IS 1343 are referred to.
Unit 1: Design of Combined Footings
7 hoursRectangular and trapezoidal combined footings.
Examined in the 80-mark end-semester paper
- Combined footings
Unit 2: Design of Flat Slab
6 hoursComponents of flat-slab construction, IS code recommendations, the direct design and equivalent frame methods.
Examined in the 80-mark end-semester paper
- Flat slabs: direct design and equivalent frame methods
Unit 3: Cantilever and Counterfort Retaining Walls
8 hoursDesign of cantilever and counterfort retaining walls.
Examined in the 80-mark end-semester paper
- Design of cantilever retaining walls
- Design of counterfort retaining walls
Unit 4: Water Tanks
7 hoursCircular and rectangular tanks resting on the ground and underground (IS code method); staging for elevated tanks: solid shaft, columns and braced frames.
Examined in the 80-mark end-semester paper
- Water tanks to IS 3370
- Circular and rectangular tanks on ground
- Underground water tanks
- Elevated tanks and staging
Unit 5: Introduction to Prestressed Concrete
6 hoursPrinciples and basic concepts of prestressing, prestressed versus reinforced concrete, high-strength concrete and steel, classification and systems of prestressing.
Examined in the 80-mark end-semester paper
- Principles of prestressed concrete
Unit 6: Circular Slabs; Formwork
6 hoursCircular slabs fully restrained, partially restrained and simply supported at the edges; loads on formwork, Indian standards and design of shuttering for columns, beams and slabs.
Examined in the 80-mark end-semester paper
- Design of circular slabs
- Design of formwork for columns, beams and slabs
Unit contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).