NAT — Network Address Translation — Concept Check
Questions on NAT — Network Address Translation. NAT maps private IP addresses to one or more public IPs, allowing many devices behind a router to share a single public IP. It extends IPv4 address space but breaks end-to-end connectivity.
Questions in this quiz
6 questions on NAT — Network Address Translation — Concept Check. Work through them here, then start the quiz to answer them and see your score.
1.A company uses a NAT router to connect its internal network to the internet. What happens when a device inside the network sends a packet to an external server?
- AThe NAT router blocks the packet unless port forwarding is configured.
- BThe NAT router replaces the private IP with its public IP and records the mapping.
- CThe NAT router directly forwards the packet without any modification.
- DThe NAT router assigns a new private IP to the packet before forwarding.
2.A web server behind a NAT router is not accessible from the internet. What could be a solution to this issue?
- AConfigure port forwarding on the NAT router.
- BIncrease the NAT table size.
- CUse a private IP address for the server.
- DDisable NAT on the router.
3.A user reports that their peer-to-peer application is not working properly behind a NAT. What is a likely reason?
- AThe NAT router does not support IPv6.
- BNAT increases the available IP addresses for the application.
- CThe application is using a public IP address.
- DNAT breaks the end-to-end connectivity required for peer-to-peer communication.
4.In a cloud environment, why might a Cloud NAT Gateway be used for a private subnet?
- ATo provide outbound internet access without exposing the subnet to inbound connections.
- BTo block all internet access to the subnet.
- CTo assign a unique public IP to each device in the subnet.
- DTo replace the need for a NAT router.
5.A network administrator notices that devices behind a NAT router cannot receive incoming connections. What is a potential workaround?
- ADisable NAT on the router.
- BAssign public IPs to all devices.
- CConfigure port forwarding for the required services.
- DIncrease the NAT timeout settings.
6.What is the primary purpose of STUN in NAT traversal?
- ATo assign private IPs to devices in a network.
- BTo discover the public IP and port of a device behind NAT.
- CTo relay traffic between devices behind different NATs.
- DTo encrypt data for secure transmission.