Mechanical Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Mechanical Engineering (University)

Quality and Reliability Engineering

Quality tools, control charts and process capability, reliability measures, system reliability, FMEA, testing.

Interview questions
Notes for Quality and Reliability Engineering are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.

Coming next in Quality and Reliability Engineering

  1. Dimensions and cost of quality· notes coming
  2. Deming and Juran· notes coming
  3. Seven quality tools· notes coming
  4. Kaizen, 5S and poka-yoke· notes coming
  5. Quality management systems· notes coming
  6. Control charts for variables· notes coming
  7. Control charts for attributes· notes coming
  8. Process capability indices· notes coming
  9. Six sigma· notes coming
  10. Acceptance sampling and OC curves· notes coming
  11. Failure rate and hazard rate· notes coming
  12. MTTF and MTBF· notes coming
  13. Bathtub curve and failure modes· notes coming
  14. Reliability distributions· notes coming
  15. Series and parallel systems· notes coming
  16. k-out-of-n systems· notes coming
  17. Cut set and tie set methods· notes coming
  18. Reliability allocation· notes coming
  19. FMEA and FMECA· notes coming
  20. Fault tree analysis· notes coming
  21. Maintainability and availability· notes coming
  22. Reliability-centred maintenance· notes coming
  23. Accelerated life testing· notes coming
  24. Customer satisfaction and supplier partnership· notes coming
  25. TQM framework and principles· notes coming
  26. Seven management tools· notes coming
  27. Benchmarking and root cause analysis· notes coming
  28. Quality circles and QFD· notes coming
  29. Taguchi loss function and robust design· notes coming
  30. TPM and zero defects· notes coming
  31. ISO 9000 and ISO 14000· notes coming
  32. Quality awards· notes coming
  33. Future trends in TQM· notes coming
  34. Obstacles to TQM and customer retention· notes coming
  35. Quality audits· notes coming
  36. Leadership, quality councils and employee involvement in TQM· notes coming
  37. Descriptive statistics: central tendency and dispersion· notes coming
  38. Probability distributions: binomial and normal· notes coming
  39. Design of experiments: principles· notes coming
  40. Full and fractional factorial designs· notes coming
  41. Analysis of variance (ANOVA)· notes coming
  42. Taguchi orthogonal arrays and S/N ratios· notes coming
  43. Response surface methodology: CCD and Box–Behnken· notes coming
  44. Preventive maintenance planning and scheduling· notes coming
  45. Overall equipment effectiveness and the six big losses· notes coming
  46. Spare parts management and maintenance staffing· notes coming
  47. Computerised maintenance management systems (CMMS)· notes coming
  48. Autonomous maintenance: initial cleaning and F-tagging· notes coming