Computer Engineering is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Computer Engineering

Embedded Systems

Embedded design, ARM architecture and instruction set, RTOS, communication protocols.

Interview questions
Your progress in this subject0 of 14 · 0%
  1. 1Embedded systems: overview and classificationOverview and classification of embedded systems: definitions, key properties (real-time, resource-constrained, dedicated), architectural and application classifications, schedulability results (Rate Monotonic and EDF), power and cost trade-offs, with worked examples and exam guidance.
  2. 2Embedded hardware and softwarePractical notes on how embedded hardware and software interact: definitions, performance formulas (bus bandwidth, DMA, interrupts, Amdahl), worked numerical examples and exam focus.
  3. 3Embedded system design processPractical, exam-focused notes on the embedded system design process: requirements, specification, architecture and HW–SW partitioning, verification/validation, integration, testing, and common trade-offs (real-time, power, cost).
  4. 4Quality attributes of embedded systemsQuality attributes of embedded systems describe non‑functional properties such as reliability, availability, safety, performance, power and maintainability that an engineer must design, measure and trade off.
  5. 5Hardware–software co-design and program modellingHardware–software co-design is the combined, iterative partitioning and modelling of a system into hardware and software parts so the final embedded product meets functional, timing, cost and power goals.
  6. 6Embedded firmware design and developmentPractical, exam-focused notes on designing and developing embedded firmware: definitions, design flow, memory/linker/startup, interrupts/ISRs, concurrency and synchronization, drivers, bootloaders, testing and debugging, with formulas and worked examples.
  7. 7ARM and RISC design philosophyNotes on ARM and RISC design philosophy: why RISC ideas matter for ARM cores, key definitions and trade-offs, formulas for performance, worked numerical examples, common mistakes, exam question types and a quick check.
  8. 8Embedded hardware: AMBA bus, memory and peripheralsAMBA (ARM Microcontroller Bus Architecture) defines on-chip bus families (AXI, AHB, APB) and related concepts (masters, slaves, arbitration, bursts, memory-mapped peripherals, DMA and wait-states) used to connect CPU, memory and peripherals in embedded systems.
  9. 9ARM core: dataflow, registers and CPSRNotes on ARM core dataflow: how instructions move data through registers, the register set and banked registers, and the Current Program Status Register (CPSR) with its flags and role in conditional execution and mode changes.
  10. 10ARM pipeline, exceptions and interruptsConcise study notes on ARM instruction pipelining, pipeline hazards and the ARM exception/interrupt mechanism (vectors, modes, context saving), focused for university exam preparation.
  11. 11ARM data processing instructionsClear, exam-focused notes on ARM 32-bit data-processing instructions: encoding, operand2 (immediate and shifts), condition flags, common opcodes and examples.
  12. 12ARM load–store and software interrupt instructionsPractical notes on ARM load–store (LDR/STR family, addressing modes, multiple-load/store) and software interrupt (SWI/SVC) instructions, how they work, syntax to remember, worked examples, common exam mistakes and practice questions.
  13. 13PSR instructions, constants and conditional executionHow ARM uses the Program Status Registers (PSRs), how immediate constants are encoded and produced, and how conditional execution works (ARM state and brief Thumb note) — all essential for writing and understanding correct assembly for embedded systems.
  14. 14Task scheduling, communication and synchronisationTask scheduling, communication and synchronisation explain how real-time tasks are ordered, how tasks exchange data, and how to avoid race conditions and deadlock in embedded systems.

Coming next in Embedded Systems

  1. ARM operating modes· notes coming
  2. RTOS basics: tasks, processes and threads· notes coming
  3. Embedded communication protocols: CAN, MODBUS, UART, SPI and I2C· notes coming
  4. Embedded development environment, integration and testing· notes coming