Computer Engineering is coming soon
We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.
Computer Engineering
Computer Networks
OSI and TCP/IP, data link, routing and IP addressing, TCP and UDP, application protocols.
Your progress in this subject0 of 23 · 0%
- 1Uses of networks and network types: PAN, LAN, MAN and WANClear, exam-focused notes on why networks matter and on the four common network types (PAN, LAN, MAN, WAN), their definitions, typical uses, limits, diagrams to draw, simple formulas (propagation delay, bandwidth–delay product), worked examples, common mistakes and exam tips.
- 2Protocol hierarchies and servicesProtocol hierarchies organize network functions in layers where each layer offers services to the layer above via a well-defined interface and implements protocols visible to its peer layer on another host.
- 3OSI and TCP/IP reference modelsClear, exam-focused notes on the OSI seven-layer model and the TCP/IP reference model: definitions, layer functions, mapping, encapsulation, formulas, worked examples and exam pointers.
- 4Physical layer: transmission mediaOverview of physical transmission media: guided and unguided media, their properties, impairments (attenuation, dispersion, noise, crosstalk), important transmission-line formulas and typical numbers, with worked examples and exam guidance.
- 5Telephone system and broadbandHow the traditional telephone network (PSTN) works, how voice is digitized and switched, and the broadband technologies that replaced or augmented the last mile (ISDN, DSL, cable, fiber), with core formulas and exam-style examples.
- 6Data link layer: framing and addressingFraming puts packets into link-layer frames and addressing gives each network interface a MAC so nodes on a shared link find each other.
- 7Error detection and correction: parity, checksum and CRCNotes on parity, checksums (1's-complement) and CRC: definitions, how they work, exact polynomial division method for CRC, formulas, worked examples, common mistakes and exam pointers.
- 8Flow control: stop-and-waitStop-and-wait is the simplest flow-control protocol in which the sender sends one frame and waits for its acknowledgment before sending the next; it is used where simplicity and correctness matter more than efficiency, and it is the starting point to understand sliding-window protocols like Go-Back-
- 9Sliding window: Go-Back-N and Selective RepeatSliding-window flow-control and ARQ protocols (Go-Back-N and Selective Repeat): how window size, sequence-number space and ACKing affect reliability, throughput and ambiguity.
- 10Network layer services and design issuesStudy notes on Network Layer services and design issues: what the network layer must provide, the trade-offs in its design, exact definitions (datagram vs virtual circuit, forwarding vs routing), performance formulas, worked examples and common exam pitfalls.
- 11Routing: shortest path, flooding, distance vector and link stateRouting algorithms choose paths between network nodes; this note explains shortest-path (Dijkstra), flooding, distance-vector (Bellman–Ford style) and link-state methods, their equations, costs, and worked traces.
- 12IPv4 addressing, CIDR and subnettingPractical notes on IPv4 addressing, CIDR and subnetting: how addresses, masks and prefixes work, how to compute networks, broadcasts and host counts, with worked exam-style examples.
- 13ICMP, ARP, RIP and OSPFConcise study notes explaining ICMP (error/reporting messages), ARP (IP-to-MAC mapping), RIP (distance-vector routing) and OSPF (link-state routing) with definitions, algorithms, examples and exam focus.
- 14Transport layer services and socket programmingTransport layer provides process-to-process (end-to-end) communication: services such as reliable data transfer, multiplexing/demultiplexing, flow and congestion control, and the socket API used by applications to send/receive data over TCP/UDP.
- 15Connection establishment and releaseConnection establishment and release explain how two endpoints set up and tear down a reliable connection (sequence numbers, flags, timers like RTO and TIME-WAIT) used for TCP-style connection-oriented communication.
- 16TCPTCP (Transmission Control Protocol) provides a reliable, ordered, byte-stream service between processes on hosts; engineers use it for implementing dependable application-layer services and tuning performance (flow/congestion control, timers, and options).
- 17UDP, SCTP and RTPCompare and explain the transport protocols UDP (simple datagram), SCTP (reliable multi-stream/multi-homed), and RTP (real-time payload framing) for networking exams.
- 18Congestion control and QoSCongestion control and Quality of Service (QoS) cover how networks avoid and manage overload (congestion) and how they guarantee or differentiate traffic performance (delay, throughput, jitter, loss).
- 19Application layer models: client–server and peer-to-peerCompare the client–server and peer-to-peer (P2P) application-layer models: definitions, pros/cons, exact derivation of file-distribution time formulas, diagrams to draw, exam-style examples and common pitfalls.
- 20HTTP and the webClear, exam-focused notes on HTTP and the web: protocol basics, message formats, caching, cookies, performance calculations (RTT and download time), security (HTTPS/TLS), proxies and CDNs, with worked examples and exam tips.
- 21DNSDNS (Domain Name System) maps human names to IP addresses using a global hierarchical database with caching and delegation, and engineers use it to design, troubleshoot and optimise name resolution performance and reliability.
- 22Email: SMTP, MIME, POP3 and IMAPEmail systems use SMTP to send mail between servers/clients, MIME to encode/structure non-text attachments, and POP3/IMAP for clients to retrieve and manage mail from a server.
- 23FTP, TELNET, DHCP and SNMPNotes on FTP, TELNET, DHCP and SNMP: their purpose, operation, message formats, example traces, common exam errors and practice questions.
Coming next in Computer Networks
- IPv4 vs IPv6 and the IP datagram· notes coming
- Data and signals: analog and digital· notes coming
- Transmission impairments, Nyquist and Shannon capacity· notes coming
- Network performance: throughput, latency and jitter· notes coming
- Hamming distance and linear block codes· notes coming
- LAN technologies: Ethernet, Token Ring and FDDI· notes coming
- Wireless LANs and Wi-Fi· notes coming
- WiMAX, Bluetooth and RFID· notes coming
- Network security basics: cryptography, signatures and firewalls· notes coming
- Multiple access: ALOHA and CSMA/CD· notes coming
- Count-to-infinity, path vector and hierarchical routing· notes coming
- Switching: circuit, packet and virtual-circuit· notes coming
- Network address translation· notes coming
- TCP timers· notes coming
- Concurrent and iterative servers· notes coming
- BOOTP and DHCP· notes coming
- TELNET and the network virtual terminal· notes coming
- HDLC and PPP· notes coming
- Streaming media: RTCP, SIP and VoIP· notes coming
- Frame relay and ATM· notes coming
- BGP and inter-domain routing· notes coming
- Multicast routing and IGMP· notes coming